Hi Experts,

We have the Special user id specifically
created to receive emails.

The requirement is to send Notification mail to the emails
received after few verifications.

We have assigned the Z class in SO50 for this recipient
address.

And this Z class uses the interface IF_INBOUND_EXIT_BCS .

However, when an email is received in SOIN , this
class is not getting triggered.

When I manually resend the mail in SOIN , I get the debugger
triggered and the class is getting called.

I placed a sample code to update a custom table through the
class.

And this works fine when the mail is resent.

Could you please help on this ?

Ideally the class should be triggered as and when an email
is received in the inbox.

Thanks,

Theyana

Hi All,

I have a requirement to send a INTERNAL_ORDER IDOC to another system on creation or on change of an order. I have created the model view and added the BAPI InternalOrder.SaveReplica in the distribution model (BD64) and the next step was for me to add a filter. I tried creating a filter group but then I get the message "Select node:Content-dependent parameter filtering". I have done a similar configuration for PROJECT idoc before and I was able to solve this by configuring in BD95 - Defining the filter object type and then BD81 - Assigning the filter object type to the parameter. However now when I try and implement the same steps for the Internal Order IDOC, I am having trouble assigning a filter object type to a parameter. I want to filter by company code and so far I was able to define the filter object type (BUKRS) in BD95 and then when I go on to try and assign this to the BAPI Parameter in BD81 , only 1 parameter appears (objectstatus) when I drop down for the parameter options.

The row entry that I am trying to add is:

But only OBJECTSTATUS appears in the Parameter block as an option when I press F4.

Further more when I try save the entry as above, I get an error. Error Message: "Entry MASTERDATA does not exist in (check entry)"

Can I please get some guidance on how to filter the internal order by company code or more importantly advise on which step I may have skipped in order have “MASTERDATA” appear as an option for Parameter field in BD81.

Thank you.

HI Team,

  I am new to Sap PI. I have one scenario xml to idoc in sap pi. Can anyone please help me step by step for this scenario.

Thanks in Adnavce

Kallu

Hi all,

Did anybody come across this issue?

I have a SAP System - let's call it "TM" -  that I want to bind with another non-SAP one - let's call it "FB" - without any PI between them.

The communication is made as a Service Consumer (TM side), the Proxy (see image below) and Proxy-Implementation Class being generated automatically after the ".wsdl" file and the "url" given by the documentation of FB.

Everything looks good! All the Methods (operations) that are available from the service have been added to the Implementing Class.

After the Proxy generation, I also created the Logical Port (in transaction SOAMANAGER - see image below) where the path, host, prefix, and all the necessary stuff were also automatically created after the ".wsdl" document.

So far so good! When I want to test it and to play along with this connection TM -> FB, I am creating the Proxy-Object, I am filling the required User / Pass / and an ID in order to call the first method. As you have probably guessed already: LOGIN.

    ls_in_login-login_request-id             = '...some ID...'.

    ls_in_login-login_request-user          = '...some user ...'.

    ls_in_login-login_request-password  = '...some password'.

TRY.

         CREATE OBJECT lo_proxy

           EXPORTING

             logical_port_name = 'ZAS_PORT_FB'.

     CATCH cx_ai_system_fault INTO lo_ref.    " Application Integration: Technischer Fehler

         ...

ENDTRY.

   TRY.

       CALL METHOD lo_proxy->login

         EXPORTING

           input  = ls_in_login

         IMPORTING

           output = ls_out_login.

     CATCH cx_ai_system_fault INTO lo_ref.    " Application Integration: Technischer Fehler

          ...

     CATCH cx_ai_application_fault INTO lo_ref.    " Application Integration: Applikations Fehle

     ...

ENDTRY.

As a response, (meaning that the connection works and that the WebService acknowledges the connection) I get a "SessionID" -> a string of characters.

In the Wiki of the Service is written that from this point on, every other methods (but I mean ALL of them, logout() also...) need to be called along with this SessionID. The problem is, that this SessionID doesn't have a specific place in the "inbound"-structure of the methods, but this mechanism of passing around the SessionID must be made with URL rewriting. Another solution would be to use COOKIES. From my point of view, a so-called URL rewriting would be easier, right?

In the documentation is the following info written:

"

URL rewriting (recommended):

The JSessionId is attached to the URL of the SOAP request, as follows:  http://[URL];jsessionid=[jsessionid]

Caused by tecnical reasons, it is necessary to specify the static string “;jsessionid=” in lower case letters.

"

I have turned this "LO_PROXY" object around and around and around... trying to find a solution... a method...anything that would let me rewrite the URL, but nothing...

I have also tried to use ce CL_HTTP_CLIENT class and to create myself the client and the URL and the host and everything manually... but in this case how do I end up in calling a specific "custom" method -> for instance... how do I call the "LOGIN"... or the LOGOUT...where do I put the parameters, etc?

Do you have any suggestions / ideas / hints ?

Thanks a lot in advance!

Warm regards,

Alex

Hi Experts,

Currently my client is creating Business Partners through BP transaction.

The issue now we have is that create and changes made using a BAPI for creation  BAPIBUSISM007_CREATEFROMDATA and change BAPIBUSISM007_CHANGE.

For both bapis i have find message type and basic types.

BP creation: Message type ISMBP_CREATE and  basic type ISMBP_CREATE01

BP change  :Message type ISMBP_CHANGE adn basic type ISMBP_CHANGE01

Now i am using existed partner profiles, partner profile LS ->  added message type and basic types in outbound parameters.

Then i have added this BAPI IDOC details in distribution model Add BAPI using the old distribution model.

Now i am creating BP using Bapi in my system business partners are creating but IDOCs are not triggering.

Please help me.

Thanks,

Anji

Hi Frinds,

I am working As a ABAPer, I am working now on system version 731.

I was created Web Service  by exposing a RFC function module same time created configuration  in SOAMANAGER . ater configuration i am testing through SOAP UI TOOL , but i am getting below error in soap ui response.

Please help me to resolve this issue.

My Pay load.

<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:urn="urn:sap-com:document:sap:rfc:functions">

   <soap:Header/>

   <soap:Body>

      <urn:ZISV_TEST1>

         <PUT_OPPT_AGGREMENT>

            <MODE1>1</MODE1>

            <DATA>NARAYANA</DATA>

         </PUT_OPPT_AGGREMENT>

      </urn:ZISV_TEST1>

   </soap:Body>

</soap:Envelope>

Response

<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">

   <env:Header/>

   <env:Body>

      <env:Fault>

         <env:Code>

            <env:Value>env:Receiver</env:Value>

         </env:Code>

         <env:Reason>

            <env:Text xml:lang="en">Web service processing error; more details in the web service error log on provider side (UTC timestamp 20140501021028; Transaction ID BDD5D0E38A99F1EE9D5F0A4EAF320888)</env:Text>

         </env:Reason>

         <env:Detail/>

      </env:Fault>

   </env:Body>

</env:Envelope>

Regards

Nani

i have an inbound idoc with status 52

error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created

                         Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created

i debugged but i haven't find out the reason

am updating 0000,0001,0002,0003,0006 infotypes

Hi all ;

I have a data in likp in field lifex .

Problem : When i run VF01 tcode to post billing document , i reference delivery. I want to copy likp-lifex to billing header vbrk-zzbstkd.

I tried to benefit from USEREXIT_FILL_VBRK_VBRP(Module pool SAPLV60A, program RV60AFZC). But vbrk-vbeln is initial.

Referance documents :

User Exits For Billing - System Modifications - SAP Library

Regards.

M.Ozgur Unal

Hi Expert,

Do you have any idea for below attachment issue? we are getting error when Creating web service consumer

SAP SOD: Create web service consumer (external web service)

WSDL: https://xxxdev.service-now.com/u_charm.do?WSDL

1. 1. goto SE80, package ZSOLMAN, then Create à Enterprise Service
2. 2. Select Service Consumer then continue.
3. 3. Select “External WSDL” then “URL”
4. 4. Enter WSDL url then continue.
5. 5. Enter package name, Prefix (any unique prefix e.g ZXX), then Continue and Complete.

regards,

Raymond

Hi.

I create GTM contract with BAPI_TRADINGCONTRACT_CREATE. But i not see parametrs import: start dateand end dateof the contract (sales part and purchase part)

These fieldson the screen:

KOMWBHK-GUEBG and KOMWBHK-GUEEN  (sales part)

KOMWBHD-KDATB_MM and KOMWBHD-KDATE_MM (purchase part)

To recordthese fieldsI need to useEKSTENSIONIN?

thanks in advance

PS

sorry formy english)

Hello,

Currently I'm working with excel SAP interfacing. For this I am using VBA to call different BAPI functions.

I have already some interface scripts working, however I have also one which I cannot discover what I'm missing.

The VBA code is to reach BAPI_ACC_DOCUMENT_POST

My error is ---> FI/CO interface: Inconsistent FI/CO document header data for updating

So I'm appealing to you SAP bapi VBA gurus whether you have any ideas how to fix my issue.

I'm attaching below my code for you to review:

Option Explicit

' Declaration for the necessary objects

Dim objBAPICortrol, objConnection, objCreateMaterial, objReturn As Object

Dim objPRFCT, objNTXT, objDTXT As Object

Dim vLastRow, vRows As Integer

Dim objMaterial1, objMaterial2, retMess As Object

Sub Batch()

' Getting the last filled Row in Column

vLastRow = Cells(Rows.Count, "A").End(xlUp).Row

' Setting the necessary variables for R/3 connection

Set objBAPICortrol = CreateObject("SAP.functions")

Set objConnection = objBAPICortrol.Connection

objConnection.System = "SYSTEM NAME"

objConnection.Client = "Client number"

objConnection.user = "USERNAME"

objConnection.Password = "PASSWORD"

objConnection.Language = "EN"

' Establish a connection

If objConnection.logon(0, False) <> False Then

'MsgBox "Connection Established"

End If

On Error Resume Next

' Assign the Parameters

Set objCreateMaterial = objBAPICortrol.Add("BAPI_ACC_DOCUMENT_POST")

Set objMaterial = objCreateMaterial.Exports.Item("DOCUMENTHEADER")

Set objMaterial1 = objCreateMaterial.Tables.Item("ACCOUNTGL")

Set objMaterial2 = objCreateMaterial.Tables.Item("CURRENCYAMOUNT")

'Set Values

objMaterial.Value("USERNAME") = "USERNAME"

objMaterial.Value("HEADER_TXT") = "BAPITEST"

objMaterial.Value("COMP_CODE") = "0001"

objMaterial.Value("PSTNG_DATE") = "20140506"

objMaterial.Value("TRANS_DATE") = "20140506"

objMaterial.Value("DOC_DATE") = "20140506"

objMaterial.Value("FISC_YEAR") = "2014"

objMaterial.Value("DOC_TYPE") = "SA"

objMaterial.Value("REF_DOC_NO") = "BAPITEST"

objMaterial.Value("FIS_PERIOD") = "00"

objMaterial1.Rows.Add

objMaterial1.Value(1, "ITEMNO_ACC") = "1"

objMaterial1.Value(1, "GL_ACCOUNT") = "0007180000"

objMaterial1.Value(1, "ITEM_TEXT") = "BAPITEST1"

objMaterial1.Value(1, "DOC_TYPE") = "SA"

objMaterial1.Value(1, "COMP_CODE") = "0001"

objMaterial1.Value(1, "PROFIT_CTR") = "AZ1111" ---->'profit center is normally having 10CHARS but as there are letters I'm not using zeros at the beginning

objMaterial1.Value(1, "ITEMNO_ACC") = "2"

objMaterial1.Value(1, "GL_ACCOUNT") = "0007180000"

objMaterial1.Value(1, "ITEM_TEXT") = "BAPITEST1"

objMaterial1.Value(1, "DOC_TYPE") = "SA"

objMaterial1.Value(1, "COMP_CODE") = "0001"

objMaterial1.Value(1, "PROFIT_CTR") = "AZ1111"

objMaterial2.Rows.Add

objMaterial2.Value(1, "ITEMNO_ACC") = "1"

objMaterial2.Value(1, "CURRENCY") = "EUR"

objMaterial2.Value(1, "AMT_DOCCUR") = "-1.00"

objMaterial2.Value(1, "ITEMNO_ACC") = "2"

objMaterial2.Value(1, "CURRENCY") = "EUR"

objMaterial2.Value(1, "AMT_DOCCUR") = "1.00"

' Function call

objCreateMaterial.call

Set objReturn = objBAPICortrol.Add("BAPI_TRANSACTION_COMMIT")

objReturn.call

Set retMess = objCreateMaterial.Tables.Item("RETURN")

If retMess Is Nothing Then

MsgBox retMess.Value(1, "MESSAGE")

End If

' Get return parameters & display in excel

Set objReturn = objCreateMaterial.Tables("RETURN")

ActiveSheet.Cells(5, 1) = retMess.Value(2, "MESSAGE")

End Sub

Dear expert,

the issue is I have scriptform which font is CNSONG, preview and print both fine, but when it archive to PDF, the font is not display properly, eg. title font is not blod anymore.

can some one give smoe advices ?

thanks in advance!

Hello,

We have a third party team who uses ONBASE tool to call Webservices API for create/update service orders and followups in CRM system.  The issue they are facing is out of 10-15 calls, 3-5 calls are getting failed and response contains blank.  When they get failure and try next time in 30sec gap, with the same data the transaction is success.  So, we can rule out the data issue here.

We have taken fiddler trace and noticed HTTP 500 error when the failure occurred.  Below are the details of the error.

<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><soap:Fault><faultcode> soap:Server </faultcode><faultstring xml:lang="en"> RABAX occurred on server side </faultstring><detail><sap:Rabax xmlns:sap="http://www.sap.com/webas/710/soap/runtime/abap/fault/generic"><SYDATUM>20140422</SYDATUM><SYUZEIT>094349</SYUZEIT><ERRORCODE>MESSAGE_TYPE_X</ERRORCODE></sap:Rabax></detail></soap:Fault></soap:Body></soap:Envelope>

Did any one face the same issue (or) can provide any pointers please?  Appreciate your help, thanks in advance!

Regards,

Satish

We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement document (and stored in SER03). How can we accomplish this?

Currently segment E1MBXYJ is maintained with the inbound delivery and item, and the material document does contain the expected link between material document and inbound delivery. Unfortunately, the serial number(s) matained on the delivery item do not get saved to the material document.

If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. THIS is what we want to accomplish via the above IDoc process.

Any help you can provide is greatly appreciated.

CHEERS!

Hi there,

I'm not sure that I am in the right place, if not my apologies.

recently we are troubled by the following problem on our SAP RFC connection to our subsystem. It seems that the SAP connector randomly refuses WMTORD iDoc messages. Maybe someone recognizes this problem and can give me a direction on the cause and preferably towards the solution. I'm sorry but the error logging is in Dutch.

2014-05-08 09:01:50,762 [63] INFO  Vertices.Logging.SingletonTagLogger Sender:9 Checking Transaction ID: Tid 0A69C0543C2E536B2BDE119E, new transaction

2014-05-08 09:01:50,762 [63] INFO  Vertices.Logging.SingletonTagLogger Sender:9 Rollback transaction ID: Tid 0A69C0543C2E536B2BDE119E

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RfcServerError opgetreden in RFC server NCO_SERVER:

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RFC Caller System ID: PRE

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RFC functienaam: IDOC_INBOUND_ASYNCHRONOUS

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Fout type: RfcInvalidParameterException

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Fout bericht: Index 1 of table ARFCSDATA out of range: CurrentIndex must be in range 0..0

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RfcServerApplicationError opgetreden in RFC server NCO_SERVER:

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RFC Caller System ID: PRE

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer RFC functienaam: ARFC_DEST_SHIP

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Fout type: RfcServerApplicationException

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Fout bericht: Uncaught exception SAP.Middleware.Connector.RfcInvalidParameterException thrown in SAP.Middleware.Connector.RfcServer.ARfcDestShipImp when executing RFC server function ARFC_DEST_SHIP

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Inner exception type: RfcInvalidParameterException

2014-05-08 09:01:50,762 [63] ERROR BoschRexroth.SAPCommunication.NcoServer Inner exception message: Index 1 of table ARFCSDATA out of range: CurrentIndex must be in range 0..0

Hi Gurus,

I am trying to consume .NET wcf service via proxy creation (SE80) as I have done same for WSDL service.

May be there will be different process to deal with .Net WCF service so can you please send me a link or process, how to consume or use wcf service.

Thanks,

Tahir

Hi all,

I am fresher to SAP. I wanted to learn  SAP ABAP or SAP PI (SAP Netweaver Process Integration).

So which one should I choose and Why??

Please help me.......

Hi all,

I'm trying tomake a connectionwithSAPthroughtheSAP.Functionsobject, the connection's propertyRfcWithDialogis setto True,so it ispossible to usetheSAPscreensduring anRFC call,howeverwhen running themethodcallSAP's screen isnot shown as it should,noting that thecodeusedworked perfectlyuntila fewdays ago. Can anyone helpme solvethis problem?

Sub RecordBDC()

Dim SAPConn As Object
Dim rfcFunc As Object
Dim authCheck As Object
Dim tCode As Object
Dim dynTab As Object
Dim mesTab As Object
Dim idx1 As Long
Dim idx2 As Long

'Create the SAP Functions object
Set SAPConn = CreateObject("SAP.Functions")

'Set up Connections parameters

SAPConn.Connection.System = "d4. PD4 - Produção TIM ONE CLIENT"
SAPConn.Connection.client = "203"
SAPConn.Connection.user = "MyUser"
SAPConn.Connection.Password = "MyPassWord"
SAPConn.Connection.Language = "PT"

SAPConn.Connection.RfcWithDialog = True

'Performing the connection
If SAPConn.Connection.IsConnected = 1 Then
   
    SAPConn.Connection.logoff
    If SAPConn.Connection.Logon(0, True) <> True Then
        MgSapLogOn = vbCancel
        Exit Sub
    End If
   
    Else
       
        If SAPConn.Connection.Logon(0, True) <> True Then
            MgSapLogOn = vbCancel
            Exit Sub
        End If
End If
   
End With

'Set up RFC parameters
Set rfcFunc = SAPConn.Add("BDC_RECORD_TRANSACTION")
Set tCode = rfcFunc.exports("TCODE")
Set authCheck = rfcFunc.exports("AUTHORITY_CHECK")
Set dynTab = rfcFunc.tables("DYNPROTAB")
Set mesTab = rfcFunc.tables("MESSTAB")
tCode.Value = "Z_SD_FAT_DET"

'Call the RFC
DoEvents
If rfcFunc.Call = True Then 'SAPshould showthe screenof thetransactiondefinedinparameter tCode

   idx2 = 0
   conRepl = MsgBox("Do you need BDC_CURSOR/BDC_SUBSCR?", vbYesNo + vbDefaultButton2)
   For idx1 = 1 To dynTab.RowCount
       If conRepl = vbNo And dynTab.Value(idx1, "FNAM") = "BDC_SUBSCR" Or dynTab.Value(idx1, "FNAM") = "BDC_CURSOR" Then
       Else
          idx2 = idx2 + 1
          ActiveSheet.Cells(idx2 + 1, 1) = idx2
          ActiveSheet.Cells(idx2 + 1, 2) = dynTab.Value(idx1, "PROGRAM")
          ActiveSheet.Cells(idx2 + 1, 3) = dynTab.Value(idx1, "DYNPRO")
          ActiveSheet.Cells(idx2 + 1, 4) = dynTab.Value(idx1, "DYNBEGIN")
          ActiveSheet.Cells(idx2 + 1, 5) = dynTab.Value(idx1, "FNAM")
          ActiveSheet.Cells(idx2 + 1, 6) = "'" & dynTab.Value(idx1, "FVAL")
       End If
   Next
   MsgBox "Completed"
Else
   MsgBox "Transaction cannot be called. " & Chr(13) & "Please check auth. or etc.."
End If

End Sub

Hello,

I am currently calling an outbound proxy in my program in a try.. catch block. The only exception in my proxy is CX_AI_SYSTEM_FAULT which I defined in the catch block.

My issue is, when the proxy is disconnected, the exception cx_ai_system_fault is not being caught, subrc is also 0 but when I verify in SXMB_MONI, there is an error.

Does anyone know how can I determine when a proxy is disconnected ?

Is there any FM or method ? Or changes need to be made in the proxy configuration?

Thank You.

Hello Team,

We work on SAP - CLICK integration system.

The data flows to Click Scheduling from SAP.

We have added a new field in the XML using this transaction /WSCGMBH/A_TMPL.

Now, when we are reverting the addition of this field, it still shows in the XML code that is created.

Please can you help us in understanding why our code revert is not working?

Thanks in advance!!

Please also let me know if you need more data on this.

Regards,

Dheemahi